Nissan 370Z Rear Suspension Kit

Nissan 370Z Rear Suspension Kit


Revised kinematics, not just dropped knuckle.
Wisefab Nissan 370Z kit will give a good kinematics with lowered car - higher roll center, antisquat, revised cambergain and bumpsteer for maximum grip.

  • About the same weight as original aluminium suspension.
    All the metal components on Wisefab 350Z rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings.

  • Easy camber adjustment.
    Special teethed washer is used for adjustment.

  • Bump steer adjustment.
    Possibility to adjust bump steer by changing rod end location in a slot.

  • Anti-squat adjustment.
    Possibility to adjust anti-squat by changing the top forward link height on upright.

  • Adjustable antiroll bar (swaybar) motion ratio.
    There are 3 possibilities for antiroll bar drop link attachments. 
    Changing antiroll bar motion ratio is quick and easy way to tune your car understeer/oversteer.

Kit includes:

  • Pre-set suspension links.

  • Knuckles with hardware.

  • Pick-up pount relocating bracket.

  • Installation guide.

Other components

  • Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.

  • This kit assumes coilovers to adjust ride height and use spring around the shock not on rear link.

  • Possibility to use either original 370Z , 350Z or S-Chassis hub with bigger CV joint.

Minimum rim size is 17.

Add To Cart

These items are stocked in the us but if out of stock, they ship from overseas. Lead times may vary.